Linx-technologies MDEV-GPS-SG Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Linx-technologies MDEV-GPS-SG. Linx Technologies MDEV-GPS-SG User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 3
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
INTRODUCTION
This software is designed to interface with a SG or SR Series Master Development System and to display the
location and navigation data provided by the module. Documentation for the module can be found by clicking
the “Software Help” label at the top of the main window.
THE PROGRAM INTERFACE
When the program starts, the screen will be empty of data, as shown in the figure below.
The SG or SR Series Master Development system should be plugged into a USB port. When the button labeled
“GPS Paused” is clicked, the software establishes a connection to the board through the USB module and
initiates communication. Please note that the jumper on the development board must connect the TX USB and
RX Module lines on the board’s header. The label on the button changes from “GPS Paused” to “Reading GPS”
once a connection is made. To close the connection, simply click the button again.
WIRELESS MADE SIMPLE
®
SG/SR Series Master Development System
Software User’s Guide
Figure 1: The Initial Screen
Zobrazit stránku 0
1 2 3

Shrnutí obsahu

Strany 1 - Software User’s Guide

INTRODUCTIONThis software is designed to interface with a SG or SR Series Master Development System and to display thelocation and navigation data pro

Strany 2

SG/SR Series Master Development SystemSoftware User’s GuidePage 2Once connection has been established, the software displays the information received

Strany 3

SG/SR Series Master Development SystemSoftware User’s GuidePage 3The bottom half of the screen is a list of the data from the receiver. The format of

Příbuzné modely MDEV-GPS-SR

Komentáře k této Příručce

Žádné komentáře